[WIP] Resistance(new)

Request some UA artwork/screenshots or display yours here.
User avatar
deetex
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 142
Joined: Wed Aug 11, 2010 10:40 pm
Location: Holland
Contact:

[WIP] Resistance(new)

Post by deetex » Tue Feb 11, 2020 5:32 pm

Couple of things...

The Resistance thing I'm working on is NOT going to be like the Ghorkov images I wipped up earlier.
It is NOT based on an internet doodle I found online one day.

nor are THESE going to representative of the final product.
And as before.... 4K image warning.

Image

Image

Image
Last edited by deetex on Tue Feb 18, 2020 8:25 am, edited 2 times in total.
Image

GoldStar611
BlackSect Creator
BlackSect Creator
Posts: 919
Joined: Sun Dec 02, 2007 1:16 am
Location: USA
Contact:

Re: [WIP] Resistance(new)

Post by GoldStar611 » Thu Feb 13, 2020 2:43 am

that looks pretty slick. What's the L shaped thing on the top?
Image
Image

User avatar
deetex
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 142
Joined: Wed Aug 11, 2010 10:40 pm
Location: Holland
Contact:

Re: [WIP] Resistance(new)

Post by deetex » Thu Feb 13, 2020 5:07 am

I'm not sure what specific shape you're referring to... the top is adorned with a coaxial rotor. (Of Kamov fame)
Image

User avatar
CharlotteLabyrinth
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 486
Joined: Thu Mar 01, 2012 3:00 pm
Location: Schloss Charlottenburg..?

Re: [WIP] Resistance(new)

Post by CharlotteLabyrinth » Fri Feb 14, 2020 12:24 pm

It does look like a blade of coaxial rotor model, which is widespread amongst the Russian helicopters produced by Kamov design bureau. :) Perhaps that design decision was taken to represent the apparent lack of a tail rotor in the original Dragonfly model?

This one is my favourite by far! It blends very well into icy terrains of SET4 with that background environment. Especially, I love all the small details on the rotor shaft.
;--------------------------------------------------
;
; Vielleicht der niedlichste Hubi, Knuddel.
;
;--------------------------------------------------
„ Helfen - Wehren - Heilen “

Personal Declaration: I always use different usernames across different websites. Hence if you ever see my username is being used outside of Stoudson Corporation, I absolutely have no affiliation whatsoever with that!

User avatar
deetex
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 142
Joined: Wed Aug 11, 2010 10:40 pm
Location: Holland
Contact:

Re: [WIP] Resistance(new)

Post by deetex » Fri Feb 14, 2020 1:41 pm

It is in fact a coaxial rotor, indeed of prodominately russian fame and produced nearly exclusively by the Kamov company.
My reasoning for going Coax on this badboy is not so much the lacking tail rotor on the ingame model(Hornet doesn't have one either), but rather an escalating scale of awesomeness, firepower, combat profile and personal bias.

My plan for the hornet is a heavy-duty 5-bladed rotor with a tailfan(or fenestron, apparently).... as outlined in my doodle found here, and bring back the Wasp to a 2-blade huey-like design.

I've added a few more bits to the rotorhubs, and will upload a new render soon.
Meanwhile, enjoy the Falcon, added to first post.
Image

User avatar
CharlotteLabyrinth
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 486
Joined: Thu Mar 01, 2012 3:00 pm
Location: Schloss Charlottenburg..?

Re: [WIP] Resistance(new)

Post by CharlotteLabyrinth » Fri Feb 14, 2020 4:28 pm

Just realised I forgot to quote GoldStar's comment above before. :P

deetex wrote:
Fri Feb 14, 2020 1:41 pm
My reasoning for going Coax on this badboy is not so much the lacking tail rotor on the ingame model(Hornet doesn't have one either), but rather an escalating scale of awesomeness, firepower, combat profile and personal bias.

My plan for the hornet is a heavy-duty 5-bladed rotor with a tailfan(or fenestron, apparently).... as outlined in my doodle found here, and bring back the Wasp to a 2-blade huey-like design.
Aha, that sounds like a plan! I actually like the ideas of those suggested re-designs; can't wait to see the brand new models for them. Also, I believe it's been a while since I last visited your art page! If I recall correctly, a fenestron is a ducted-fan tail rotor for helicopters, right?

deetex wrote:
Fri Feb 14, 2020 1:41 pm
I've added a few more bits to the rotorhubs, and will upload a new render soon.
Meanwhile, enjoy the Falcon, added to first post.
The main rotor detail is beautiful indeed... and that Falcon picture is simply magnificent!
"... The sky is ours."
;--------------------------------------------------
;
; Vielleicht der niedlichste Hubi, Knuddel.
;
;--------------------------------------------------
„ Helfen - Wehren - Heilen “

Personal Declaration: I always use different usernames across different websites. Hence if you ever see my username is being used outside of Stoudson Corporation, I absolutely have no affiliation whatsoever with that!

User avatar
deetex
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 142
Joined: Wed Aug 11, 2010 10:40 pm
Location: Holland
Contact:

Re: [WIP] Resistance(new)

Post by deetex » Fri Feb 14, 2020 5:50 pm

CharlotteLabyrinth wrote:
Fri Feb 14, 2020 4:28 pm


Aha, that sounds like a plan! I actually like the ideas of those suggested re-designs; can't wait to see the brand new models for them. Also, I believe it's been a while since I last visited your art page! If I recall correctly, a fenestron is a ducted-fan tail rotor for helicopters, right?


The main rotor detail is beautiful indeed... and that Falcon picture is simply magnificent!
"... The sky is ours."
Indeed, as Fleurenz^Schweiz on the Discord informed me, Fenestron is indeed the term used for a ducted tail fan.

Meanwhile....

Link...
Image

User avatar
CharlotteLabyrinth
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 486
Joined: Thu Mar 01, 2012 3:00 pm
Location: Schloss Charlottenburg..?

Re: [WIP] Resistance(new)

Post by CharlotteLabyrinth » Fri Feb 14, 2020 8:56 pm

The link doesn't seem to be working at the moment, could it be a temporary issue?
;--------------------------------------------------
;
; Vielleicht der niedlichste Hubi, Knuddel.
;
;--------------------------------------------------
„ Helfen - Wehren - Heilen “

Personal Declaration: I always use different usernames across different websites. Hence if you ever see my username is being used outside of Stoudson Corporation, I absolutely have no affiliation whatsoever with that!

User avatar
deetex
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 142
Joined: Wed Aug 11, 2010 10:40 pm
Location: Holland
Contact:

Re: [WIP] Resistance(new)

Post by deetex » Sat Feb 15, 2020 2:21 pm

My apologies. SHould be fixed now
Image

User avatar
CharlotteLabyrinth
Turantul 1 (Veteran)
Turantul 1 (Veteran)
Posts: 486
Joined: Thu Mar 01, 2012 3:00 pm
Location: Schloss Charlottenburg..?

Re: [WIP] Resistance(new)

Post by CharlotteLabyrinth » Sat Feb 15, 2020 6:25 pm

Thanks! This new composition looks like a propaganda poster of the Resistance! :D Splendid work, I like the asset placements and that Resistance writing system.
;--------------------------------------------------
;
; Vielleicht der niedlichste Hubi, Knuddel.
;
;--------------------------------------------------
„ Helfen - Wehren - Heilen “

Personal Declaration: I always use different usernames across different websites. Hence if you ever see my username is being used outside of Stoudson Corporation, I absolutely have no affiliation whatsoever with that!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest